Somero S-240 Laser Screed Specifications
Increased Productivity The Somero S-240 Laser Screed features a 12-foot wide screeding head mounted on a powerful 20-foot telescopic boom. This results in 240 square feet of consolidated, laser-level concrete in less than one minute. Add to this the fact that you can take advantage of wide placement when using a Laser Screed, eliminating most formwork, and true fast-track production becomes a reality.
Concrete Paving The S-240 Laser Screed can easily place concrete over contoured surfaces when you add the Somero 3-D Profiler System. Now you can expand your Services to include paving parking lots, roadways, and runways. Concrete paving and white topping is a growing, multi-billion dollar market.
General Specifications
Overall Width: 7'-8" Outside of Tires; 14'-1" at Screed Head
Overall Length: 18'-3" Boom In; 36'-1" Boom Out; 28'-5" Transport
Overall Height: 8'-3"
Weight (nominal): 15,100 lbs.
Boom Reach: 20 ft.
Screed Width: 12 ft.
Screed Area Per Pass: 240 sq. ft.
Fuel Capacity: 27 gallons
Hydraulic Oil Capacity: 27 gallons
Upper Frame Rotation: 360 degrees
Vehicle Stabilizers: 4 hydraulically-operated stabilizer pads
Drive Train: Hydraulic-powered four wheel drive
Axles: Two Drive Steer Type
Operating Modes: 2 Wheel, 4 Wheel, Crab Steer
Tires/Wheels: 35" 12 ply / 16" rims
Maximum Speed: 3.6 MPH
Engine Type: 4 Cyl., 4 stroke, direct-injection, liquid cooled diesel 199 cu. in.
Horse Power: 65 HP @ 2600 rpm
Miscellaneous Features: 12 volt, key on & off, cold start aid, hand-actuated throttle with electric shutoff
Laser Type: 2 independently mounted laser receivers with on-board computer control panel. Continuous elevation monitoring at a rate of 10 times per second.
Screed Type: Hydraulic powered laser controlled screeding head mounted on a telescopic boom. Self-leveling screed head consists of a plow that removes excess concrete, an auger that cuts concrete to grade, and a vibrator that consolidates material at 3000 VPM.
|
Basic Package
- Rugged and proven Trimble laser control system
GL722-IR Dual Slope Transmitter with Quick Disconnect and Adaptor
GCS21 Laser Control System
- Flow on demand hydraulic system for decreased fuel usage, decreased pump wear and increased engine life
- Sound insulation to lower engine noise
- Heavy-duty drive axles
- Spare Tire
- Wheel Covers
- Integral High Pressure Washer
- Tough urethane paint
- Heavy wall hydraulic cylinders
- Two large storage boxes for tools and accessories
- Supplementary tools, equipment and spare parts
- Classroom training for your operators
|
Options
3-D PROFILER SYSTEM
The Somero 3-D Profiler System adds complete 3-D paving capability to your S-240 Laser Screed for parking lots, driveways, airport taxiways, loading docks, and more. Comes complete with all necessary system components and hard shelled cases for storage and transport.
SPARE TIRE (On Rim) 35 x 16.1 HIGH FLOTATION
Upgrade from mini-spare to full size tire
TIRE FILLING
Tires can be filled with either a liquid sealant or a polyurethane material. The liquid sealant makes the tires self-sealing after receiving punctures of up to 1/4" in diameter. The polyurethane makes the tires essentially "flat -proof."
HIGH FLOTATION STABILIZER PAD KITS
Available in 20" or 24". These oversize pads provide improved support on soft subgrades as well as lower the load ratings where there are compaction concerns. Each kit includes four pads and all necessary mounting hardware.
FIELD SUPPORT KIT
This kit has the critical spares you need to insure continuous operation packaged in a convenient case.. The kit includes: valve cartridges, hydraulic pump, Laser Transmitter, Auger Motor, Vibrator Motor, vibrator mechanical wear items.
|
Copyright © 2007 Manning Equipment